Stevie lee
05-16-2008, 08:10 AM
I own a bobcat 743 and I have 2 questions, 1st, I took the top off the governor cover to replace the [ oh ] ring which is part way down the shaft. In doing so i took the spring off the lever, not knowing what it was attached to. Once i replaced the oh ring i went to put everything back, the big spring came away from the little spring, for those that know what i'm going on about. To cut a long story short, I ended up taking the small spring off which was definately connected to the back of this other lever inside. when i tried to put it back it fell down inside somewhere. I' ve tried several times with magnets to get it out, but no success. My question is can i leave there, and just replace it, or will it do damage to the motor. 2nd Q. Does that smaller spring attach to the end of the big spring. could someone help me please help