View Full Version : ZTR Clipart
rhockjr
10-10-2004, 12:21 PM
Does any one have clipart of a ztr on their computer they would share .........I am designing my own magnetic sign and am looking for a ztr that faces straight forward towards me..........have had no luck finding one on the net.........please post it here or e-mail it to me at hlservices@earthlink.net any help would be appreciated.
Thanx ,
Roger
If all else fails, try turfmarketing.com
Lawngodfather
10-10-2004, 04:01 PM
Look in your avatar LOL
Change it to B&W
rhockjr
10-10-2004, 05:40 PM
Not quite LGF ........too much angle .........I want it straight on facing you, so you cant see the sides at all...........:D
Matty Mallard
10-10-2004, 06:47 PM
go on exmarks site do the 3d view point it infront of you then click print screen and paste pic and edit it.
rhockjr
10-11-2004, 08:59 AM
Thanx for the reply Naturecare but doing that gives me too much top view.......just too picky I guess.........someone out there has just what I'm looking for.....just have to be patient.:D
Dusty
10-11-2004, 09:22 AM
we will find it
rhockjr
10-11-2004, 09:44 AM
Thanx Dusty
rhockjr
10-11-2004, 05:08 PM
This is as close as I can find
Matty Mallard
10-11-2004, 05:26 PM
This is as close as I can find
do you need an item vectorized, so it can be cut on a printer for vehcile graphics?
rhockjr
10-11-2004, 07:32 PM
[/QUOTE] Huh!!!!!!!!!!!!!!!!Dont know what you mean NATURECARE
Matty Mallard
10-11-2004, 08:02 PM
Huh!!!!!!!!!!!!!!!!Dont know what you mean NATURECARE[/QUOTE]
Are you going to have this logo made up for the side of your truck or a trailer?
rhockjr
10-11-2004, 09:11 PM
This is for on the sides of my truck..........magnetic signs..........I aint no artist but I drew a picture to show you what I am looking for.........here goes..........
rhockjr
10-11-2004, 09:19 PM
It will look like this when I find the right image.....
Matty Mallard
10-11-2004, 09:32 PM
It will look like this when I find the right image.....
k let me go to work for you
Matty Mallard
10-11-2004, 09:45 PM
Ok, I tried something for ya....
started with Lazer z xp took off exmark logo, then did a contour, and then I added it too yours oh yea I took ropps off.
http://www.naturecareinc.net/images/forum/workforsite1.jpg http://www.naturecareinc.net/images/forum/workforsite2.jpg http://www.naturecareinc.net/images/forum/workforsite3.jpg
leadarrows
10-11-2004, 11:09 PM
What about just using the picture? I tried two sizes for you.
rhockjr
10-12-2004, 08:24 AM
Not bad at all guys , I will consider these , but I would still like the rear of the Ztr down on an even keel with the front.........but thanx for what you did , it dont look too bad really!
Martino
10-12-2004, 08:55 AM
A thought........
Ask your dealer to put you in touch with the distributor of your mower. They should have a wide array of ad slicks and would probably be happy to send you one, assuming there is one with your requirements.
It's worth a shot.
Matty Mallard
10-12-2004, 04:24 PM
only reason I didnt use actualy mower for for the copy right bs, thats why I changed it so it didnt look 100% like a exmark.
leadarrows
10-13-2004, 01:24 AM
I was bored today and made this. I don't know what youll think of it ....I'm not sure what I think of it ...LOL.
If I don't work tomrrow I'll take a level picture of my DC,like you say you want,and try to make somthing with that. This is a lot too busy I know but still it looks kinda cool I think.
I have Click art and I checked three good clip art sites I know of and ....nothing like you wanted could I find. ds)
One thing this dose show however is that if you pull the grass up a little higher so the Z sits on it, the fact that the Z is not level isn't as much of a problem. IMO
rhockjr
10-13-2004, 10:38 AM
Not too bad Lead Arrows but the mower is a little too fuzzy you must admit......it will be hard to make out at a distance.
AssistSuper
10-13-2004, 04:05 PM
This is for on the sides of my truck..........magnetic signs..........I aint no artist but I drew a picture to show you what I am looking for.........here goes..........
I think that's a damn good drawing.
Ok this maybe far out there...
What about putting like 3 goats or something, have them grazing the grass in the art work? Or even 1 goat.
rhockjr
10-13-2004, 07:10 PM
Thanks Henry but this is what it comes out like............whatta ya think
Not bad......
But can someone humor me and take his logo and add in a couple goats or sheep?
rhockjr
10-13-2004, 10:01 PM
Here you go GLAN..................
leadarrows
10-13-2004, 11:06 PM
OK Glan you ask for it ....you got it. Another fine service of Scotts Dependable Services Inc. LOL
jazzbo
10-13-2004, 11:18 PM
A lot of great talent here in the cafe. not baaad leadarrow lol
leadarrows
10-15-2004, 08:00 PM
Hey Glan you got two sheep and a goat arn't you going to comment on them? I wish the Z he wanted had been so easy to find.
Hey.................I realy like the animals in the logo better than the Z
that last one is cool just get rid of the "baaaad" line
If they were grazzing it would be that much better.
The one with the sheep what about making the sheep larger and facing each other?
Matty Mallard
10-15-2004, 10:03 PM
Hey.................I realy like the animals in the logo better than the Z
that last one is cool just get rid of the "baaaad" line
If they were grazzing it would be that much better.
The one with the sheep what about making the sheep larger and facing each other?
Glan you been baaaaaaaaaaaaaaaaaaaaaaad
vBulletin v3.5.2, Copyright ©2000-2009, Jelsoft Enterprises Ltd.